In order to play games in XCI or NCA format, you must have the required keys to decrypt them.

• Yuzu Keys Download Reddit
• Yuzu Keys 2021
• Yuzu Keys Folder
• Yuzu Keys In Linux

Process

HOW TO GET NEW KEYS FOR YUZU EMULATOR & RYUJINX (YUZU KEYS WITHOUT SWITCH) (HOW TO UPDATE YOUR KEYS) title keys: keys: http://r. HOW TO GET NEW KEYS FOR YUZU EMULATOR & RYUJINX (YUZU KEYS WITHOUT SWITCH) (HOW TO UPDATE YOUR KEYS) title keys: keys: http://r.

Guide on how to obtain the decryptions keys.

• Requirements: A hackable Nintendo Switch (you can check whether your Nintendo Switch is hackable or not here.)

• A Micro SD card of at least 1 Gigabyte in capacity.

• A Micro SD card reader.

• Lockpick: Is included by default in Kosmos CFW if you don’t use that you can download it here.

• The necessary tools (i.e a jig, paperclip, etc.) required to be able to boot into RCM and navigate around the Hekatemenu.

• TegraRCMGUI or TegraRCMSmash.

You can skip to Step 3 if you already have CFW set-up.

• Step 1: Turn off your Nintendo Switch and plug your Micro SD card into your computer.
• Step 2: Download the latest Kosmos CFW (If you already have that or use a different CFW software download the latest Lockpick. and extract than in your “/switch/” folder) and extract the zip in the root of your Micro SD card.
• Step 3: Put your SD card back in your Nintendo Switch, boot into RCM mode and inject the latest Hekate payload * using your preferred payload injector.
• Step 4a: Using the touchscreen go to Console info.
• Step 4b: Select Fuses (not kfuse!) and press the Dump fuses button to save fuses to your Micro SD card.
• Step 4c: Return back to Console info and select TSEC Keys and press the Dump Keys button to save TSEC keys to your Micro SD card.

If you are on firmware 7.x and above you’ll need to run the Lockpick_RCM payload instead.

For those above 7.x

• Step 5: Go back to the hekate menu and go to Payloads and then pick Lockpick_RCM.bin.
• Step 6: After it’s done running go to Step 7

For the title.keys (and prod.keys for those under 7.x)

• Step 7: Boot into your CFW of choice, and open the Homebrew Menu (Album application) while pressing the R button on your joy-con.
• Step 8: Navigate the menu and run Lockpick.
• Step 9: Once it says it’s done turn you Nintendo Switch off and plug your Micro SD card into your computer.
• Step 10: Locate to the /switch/ folder on your Micro SD card where you’ll find two .keys files; prod.keys and title.keys, copy these and paste them into the &appdata&/yuzu/keys/ folder.

And you’re done! Congratulations! You’ve just dumped your decryption and title keys!

Place it in:

C:/Users/yourusername/AppData/Roaming/yuzu/keys(for Windows)

~/.local/share/yuzu-emu/keys(for macOS and Linux)

Diagram showing the correct location of the decryption keys in yuzu’s User Directory.

Please seek support in the official yuzu discord server if you have any further issues.If you have suggestions for this guide please contact me on discord @MysticExile#1552

Credits:

• CTCaer for maintaining Hekate
• Rajkosto for creating and maintaining TegraRCMSmash
• AtlasNX for creating and maintaining Kosmos CFW
• shchmue for creating and maintaining Lockpick

If you are unable to find the answer to your question, please join our Discord server for support: Discord Server

Table of contents

yuzu starts with the error “VCRUNTIME140_1.dll was not found”

Current versions of yuzu require the latest versions of Microsoft Visual C++. Please download and install the following dependency:

Go to Visual Studio 2015, 2017 and 2019, and select the link next to x64.

How do I get Games?

You are legally required to dump your games from your Nintendo Switch. To do so, please follow our in-depth Quickstart Guide.

Can I use a Mariko Switch/Red Box/HAC-001(-01) or a Switch Lite for the dumping process?

No, since the Mariko Switch and the Switch Lite are both patched from the fusée gelée RCM exploit. Currently, there is no widely accessible method that allows the dumping of system files and games required for yuzu from those consoles. To check if your Switch is hackable, visit https://damota.me/ssnc/checker and test your Switch’s serial number.

yuzu starts with the error “Missing Derivation Components”

yuzu requires console keys to play your games. Please follow our Quickstart Guide to dump these keys and system files from your Nintendo Switch.

These console keys (prod.keys/title.keys) need to be placed in the following directories:

You may need to create the following “keys” folder:

• Windows: C:UsersUSERNAMEAppDataRoamingyuzukeys
• Linux: /home/USERNAME/.local/share/yuzu/keys

NOTE: This yuzu directory can be quickly accessed by selecting file/open yuzu folder within the emulator

yuzu starts with the error “Unable to start application: Os { code: 2, kind: NotFound, message: “The system cannot find the file specified.” }'

This problem is usually caused by a false positive of your antivirus software, most commonly by Avast and AVG. These applications will often incorrectly detect yuzu as malicious software and delete the executable as a result.

You can confirm it is a false positive with an online scanner, such as VirusTotal if you wish.

To fix this, you’ll need to either disable or uninstall your antivirus software. Make sure to reboot if you choose to uninstall it.

Afterwards, follow the instructions below for yuzu will not update further or starts with a Qt platform error to delete any residual files of the failed installation.

yuzu will not update further or starts with a Qt platform error

• Close all instances of yuzu and any installer processes you may have running.
• Press Win+R, in the opened window type %localappdata% and press Enter.
• Select the yuzu folder and delete it. If it is being used by another process, please double-check that you do not have any yuzu related applications running.
• Launch the installer and install yuzu again.

yuzu closes when opening Configure

This problem may be caused by a corrupt configuration file.Press Win+R, type %appdata%yuzuconfig and delete the qt-config.ini file. Your global settings will be lost after doing this, reconfigure accordingly.

Alternatively, some screen recording applications use dubious methods to inject themselves into software, causing crashes. Some examples are Bandicam, Action and Screenrec. Uninstall the software if you have it installed.

We recommend using OBS Studio, Radeon ReLive, Nvidia ShadowPlay or Microsoft XBox Game Bar.

My game is Lagging and Dropping to Low Framerates

You are likely experiencing Shader Caching. Shaders are small programs running on a graphic card, responsible for rendering graphics like terrain, explosions, characters, etc. Since a PC cannot directly execute switch shaders, It first has to translate them to a format a PC can understand. This translation process is time-consuming and you’ll notice it in two ways:

• While playing, if yuzu needs to translate a new shader, the game will stutter. Loading into a game for the first time can give long freezes due to the number of shaders. As you keep playing, the amount of stuttering will decrease.

• When launching a game, the shader cache is loaded. To speed up this process there exists an additional “precompiled” cache. This cache may get reset every time you update yuzu or install a new GPU driver. The precompiled cache will then be compiled from scratch, causing a longer load time.

Currently, the Vulkan renderer does not have a disk shader cache. This means that subsequent game loads will require the building of shaders each time.

IMPORTANT: Since the cache stores parts of the game, we don't condone sharing or downloading these, since it is considered piracy

How do I use mods or cheats?

For a list of useful mods for your favorite games, check our database with Switch Mods

To add mods to a specific game, simply right click the game in yuzu’s games list, select Open Mod Data Location and structure your mod files similar to this example:

Mod directory/mod name/romfsorMod directory/mod name/exefs

To add cheats, structure your cheat file similar to this example:

Mod directory/cheat name/cheats

An example of a correctly structured mod directory can be seen below:

The mods provided on our Switch Mods page are already structured accordingly and only need to be extracted into the mod directory folder as is.

Once added to the correct mod directory, simply right click the game again, select properties and activate the installed mod. The same process can be followed in reverse for de-activating mods

How do I install game updates or DLC?

Installing updates and DLC is simple. In the top left corner of the emulator window, select File / Install Files to NAND, then select the file you wish to install. Once installed, your files should load automatically and the installed update or DLC will be shown in the games list add-ons column of the corresponding game.

If you wish to activate/deactivate a specific update or DLC then right click your game in the games list, select Properties, then enable or disable as needed.(See Below)

Reinstalling or Overwriting Updates/DLC is as simple as following the above instructions, selecting your files and installing your Update/DLC. When doing this, any previously installed files will be removed and replaced by the newly installed versions.

How do I uninstall game updates or DLC?

To delete your installed game Updates or DLCs, right click your game, then select Remove. From here you can delete/uninstall your game Updates and DLCs from the options list (See Below)

How do I set up my controls?

Since the Nintendo Switch is a complicated device controller input wise, you will need to change some input settings depending on the game you wish to play.

Open the yuzu settings and go to Controls.

For all games other than Pokemon Let’s Go set the controls like this:

• Click on the checkbox next to Connect Controller if it is not already checked.
• Select Pro Controller in the combobox below if needed (this is also the default).
• Select your desired input device under Input Device.
• Controllers: All buttons should automatically be mapped for the selected input device.
• Keyboard: The Defaults button on bottom right sets default keyboard mappings.
• Change mappings if desired.
• Repeat steps for other players if desired.
• Confirm with OK.

For Pokemon Let’s Go set your controls like this:

• Click on the checkbox next to Connect Controller if it is not already checked.
• Select Handheld in the combobox below.
• Select your desired input device under Input Device.
• Controllers: All buttons should automatically be mapped for the selected input device.
• Keyboard: The Defaults button on bottom right sets default keyboard mappings.
• Change mappings if desired.
• Confirm with OK.

How do I use my GameCube controller adapter?

The GameCube adapter communicates with yuzu over the libusb protocol. This works natively on Linux, but requires the installation of a compatible driver on Windows using Zadig.

Zadig driver installation

Plug in the GameCube controller adapter if it hasn’t been already. Download and launch Zadig.If you’re using the Mayflash adapter, make sure you switch it to Wii U or Zadig won’t pick it up properly.

1. From the Options menu in Zadig, select List All Devices

2. In the pulldown menu, select WUP-028. Ensure that its USB ID is 057E 0337.

Yuzu Keys Download Reddit

• If it does not appear in the list then try inserting the adapter (specifically its black USB cord) into another USB port.

3. On the right column, select WinUSB then click Replace Driver. Select Yes to modify the system driver.

When the notification that the driver is installed successfully is displayed, you can close Zadig and continue to configuring the controller with yuzu.

GameCube controller configuration

Ensure the adapter is plugged in prior to launching yuzu. Then follow the How do I set up my controls? instructions, selecting Gamecube controller X as the Input Device, where X is the port in which the controller is plugged into.

How do I add a save to my Game

Yuzu Keys 2021

To add a save, simply right-click your game in the Games List, Select Open Save Data Location, then Select your User from the Profile Selector

Once your Save Data Location is open, place your game saves in this directory

yuzu closes when I try to open it

Disconnect any USB gamepad you have and relaunch yuzu.

Games fail to launch with the error: “WerFault.exe - Application Error - The application was unable to start correctly”

This typically occurs when yuzu runs out of RAM. Increase the size of your pagefile to resolve the issue.

What is Boxcat?

Please read the following article: Boxcat

Why am I getting an error?

Please look up your error in the following page: Error Codes

What are Mods and how do I install them?

Please read the following article: Mods

How do I upload my log file?

Please read the following guide: How to Upload the Log File

What is Telemetry?

Please read the following article: What is Telemetry?

How do I install Early Access?

Please read the following guide: How to install Early Access

What is yuzu?

yuzu is an experimental open-source emulator for the Nintendo Switch from the creators of Citra.It is written in C++ with portability in mind, with builds actively maintained for Windows and Linux. The emulator currently can play various commercial titles and homebrew applications with varying degrees of success.

Which software license is yuzu licensed under?

yuzu is an open-source project, licensed under the GPLv2 (or any later version). Refer to the license document for more information.

Which platforms does yuzu support?

yuzu is actively tested and supported on various 64-bit versions of Windows (7 and up) and Linux. macOS is no longer supported due to Apple deprecating OpenGL.

What are the system requirements for yuzu?

yuzu currently requires an OpenGL 4.6 capable GPU and a CPU that has high single-core performance. It also requires a minimum of 8 GB of RAM. For more details, see our Quickstart Guide.

How do I build yuzu for the OS that I use?

Take a look at the following guides for steps on building yuzu for the following platforms:

Yuzu Keys Folder

Who made yuzu?

Yuzu Keys In Linux

yuzu has an active team of open-source developers. The list of contributors can be found on GitHub.